Take care of the small details where the oil press leaks

Years of oil press production and sales experience, in order to avoid the problem of oil leakage, we should do what:

1. First of all, we must ensure the quality of oil pressure oil, often check these parts such as filter element, and replace the new one in time if there is damage.

2. Check the seals in the hydraulic press frequently to check whether the sealing performance is normal.

3. Check the oil cylinder piston rod, etc., there is no scratch on the surface of the piston rod, if there is, it should be dealt with and solved, and the parts can not work with disease.

4. Check what is inappropriate in the design of the hydraulic press, and whether the corners are rounded.

In this way, the problem of oil leakage from the oil press can be minimized.

In addition, the relevant knowledge of several hydraulic presses is popularized:

1. What is the hydraulic stroke of the hydraulic press?

The hydraulic stroke of the hydraulic press refers to the distance between the starting position and the terminal position of the hydraulic cylinder piston. In addition, when operating the hydraulic press, there is generally a stroke setting, which can be considered to refer to the working distance of the hydraulic press. And it is strictly prohibited to exceed the upper limit of the travel of the slider, and the closing height of the mold shall not be less than 6000mm.

2. What material is used as an auxiliary indenter on the hydraulic press that will not crush the product?

When the hydraulic press is in use, if some materials are used as an auxiliary indenter to avoid the problem of crushing damage to the product, it is generally installed on the mold or fixture with elastic rubber, commonly known as Yuli rubber, to achieve the purpose.

3. How to distinguish between single action and double action hydraulic press?

The simple distinction between single action and double action hydraulic press is: single action hydraulic press can only be pressed, and double action hydraulic press can be both pressed and pushed out. Through this, a simple distinction between the two hydraulic presses is made.

4. How simple to test the pressure of hydraulic press?

The pressure of the hydraulic press only needs to be connected with the pressure gauge and the oil inlet of the cylinder, and the specific value can be obtained after a pressure test.