What are the performance characteristics of the hydraulic tank

1, the shape of the tank can be determined according to the overall layout, from the tank volume of the tank and according to the principle of heat and heat dissipation of the hydraulic system to achieve thermal balance, generally adopt rectangular. The dimensions of the three directions of the box should be reasonably determined according to the size of the pump and motor and other components installed on the top and the height of the oil surface.

2, the box is welded into the skeleton with Angle steel, and then directly welded with 5mm thick steel plate. The strength and stiffness of the box can withstand the weight of the components installed on the top and the impact generated during operation. There are four feet at the bottom of the oil tank and lifting ears on both sides to facilitate heat dissipation, oil discharge and transport. Oil drain port, oil level display and cleaning window are set on one side of the tank for easy cleaning.

3, after the box is welded, the inner wall of the tank is polished, the welding slag, burr and rust generated after welding are removed, the slag of the inner wall of the tank is removed, and the inner wall is smooth and smooth, and then polished.

4. After the box is polished to remove various pollutants, the inspection of the leakage test process is carried out. First of all, use kerosene to detect leaks in the weld, check whether there are leakage points, and repair in time. Then roll the inner wall of the box with dough to remove the powder residue. Then inject enough kerosene into the tank and place it for 3-4 hours for leakage test to ensure that it is leaking.

5, the tank for pickling process treatment, the purpose of pickling process is to remove the oil stains and debris on the inner wall of the box, enhance the adhesion of paint resistance.

6. Oil temperature control in the tank

In order to ensure the normal operation of the hydraulic press system, the oil temperature in the tank must be controlled within the range. Therefore, the hydraulic press adopts the air-cooled strong cooling industrial oil cooler to control the oil temperature, and the cooling system is automatically controlled by the digital thermostat according to the set value. In the cold winter, when the oil temperature drops to too low a temperature, there is an electric heating device to pre-heat the oil so that the machine can operate normally.