Fuselage structure and design principle of a new single column hydraulic press

The body of the single column hydraulic press in addition to withstand the force occurring during the process, but also withstand the torque caused by the mold or workpiece machining center and the machine design center. The fuselage is the installation base of the actuator such as the cylinder, slide block, hydraulic pad, etc., so the structure of the fuselage should be determined by the stress and deformation of the machined parts, the installation position of the mold used in the machining parts (that is, the process requirements of the machining parts) and the overall requirements of the machine. The following points should be considered in the design:

1. Meet the installation space and travel requirements of the mold used to deform the machined parts.

2. Ensure the precision requirements of the machined parts to the fuselage.

3. Requirements for ensuring the accuracy of the die life timing.

4. In the case that the fuselage accuracy and structural rigidity are the best, ensure that the fuselage parts reach the required accuracy.

5. All components on the fuselage are compact.

6. The processing economy of the basic parts on the fuselage, and in line with the processing technology of the manufacturer.

7. The fuselage is simple in structure and easy to use.

8. Meet the modeling requirements of ergonomics and industrial aesthetics on the machine.

The above conditions determine the characteristics of the fuselage, because of the different requirements for each machine, so although they are single-column hydraulic press fuselage structure is still a variety of.