How to assemble high pressure oil pipe

In the hydraulic press, the most used is the four-column hydraulic press, because this hydraulic press is widely used, also known as the universal hydraulic press, fast response and smooth work, the impact is relatively small, low noise, energy saving and environmental protection, to achieve the speed and pressure of the stepless speed regulation, the opening height can be adjusted at will, then the hydraulic press assembly high-pressure tubing, In addition to the connection between the two relative moving parts using high pressure rubber tubes, the other parts are made of seamless steel pipe connection.

Oil press assembly of high pressure oil pipe, first of all must be firm, the connection should be tightened with nuts, in the easy vibration of the wood block, hard rubber and other liners, to reduce vibration or vibration, for the long and thin oil pipe clamp fixed; Pay attention to the distance between the pipes, to prevent mutual interference and vibration caused by knocking, for parallel or crossed pipes, as well as the distance between the pipe and the hydraulic press body, should be maintained at more than 10mm; For the hydraulic system with more complex oil circuit, the pipe and connection part should be numbered when disassembling the pipe to prevent the wrong orientation when reassembling; Under the premise of meeting the connection of hydraulic components, the shorter the high-pressure tubing, the better, and the right corner should be less to reduce pressure loss, and the four-column hydraulic press should strive to be neat, beautiful and convenient maintenance when distributing pipes.

The function of the four-column hydraulic press transmits relatively large force and torque, realizes overload protection, the hydraulic system overloads, the oil flows back to the tank through the oil relief valve, because the oil is used as the working medium, can achieve self-lubrication, even if there is an accident, the protection device can force the hydraulic press to stop, so as not to cause casualties. In addition to stamping metal, it can also be pressed for special requirements such as stretching, embossing, forming, and pressure testing.