What are the precautions for cleaning the hydraulic station of the hydraulic press

When we use the hydraulic press, there will be some impurities in its hydraulic station. So what are the precautions for cleaning the hydraulic station after the use of the hydraulic press? The following Xiaobian to introduce its several points for attention.

1. Do not use kerosene, gasoline, alcohol, vapor or other liquids to prevent corrosion of hydraulic components, pipelines, fuel tanks and seals;

2. During the cleaning process of the hydraulic press, the operation of the hydraulic pump and the heating of the cleaning medium are carried out simultaneously. When the temperature of the cleaning oil is (50-80)℃, the rubber slag in the system is easy to remove;

3, in the cleaning process, the non-metal hammer can be used to knock the tubing, which can be continuously knocked or not continuously knocked to facilitate the removal of attachments in the pipeline;

4, the intermittent operation of the hydraulic pump is conducive to improving the cleaning effect, the intermittent time is generally (10-30)min;

5. In the circuit of cleaning oil circuit, filter or filter should be installed. At the beginning of cleaning, due to more impurities, 80 mesh filter can be used, and more than 150 mesh filter can be used in the later period of cleaning;

6, cleaning should be determined according to the complexity of the system, filtration accuracy requirements and pollution degree;

7, in order to prevent rust caused by external moisture, at the end of cleaning, the hydraulic pump should continue to run until the temperature returns to normal;

8. After cleaning the hydraulic station of the hydraulic press, the cleaning oil in the circuit should be removed.