Safe operating code for hydraulic presses

When we bought the hydraulic press, we did not understand its operation skills and specifications at the beginning of use, which led to some problems, so what is the safety operation procedure of the hydraulic press? Next, let Xiaobian explain to you the specifications of the safe operation of the hydraulic press.

Safety of hydraulic press bearing specifications:

one We should be familiar with the general performance and structure of the hydraulic press when operating, and it is prohibited to overload the use.

2. Before use, lubrication should be used according to the regulations, and check whether the high-pressure pump, pressure gauge, various valves, sealing rings, etc. of the hydraulic press are normal.

3. Before starting, it is necessary to check whether the mold is matched, whether the material weight meets the requirements, and whether the material tool is accurate.

4. When pressing, the touch must be placed in the center of the plate, and eccentric use is prohibited. Before starting each shift, the hydraulic press should check whether there is a crack in the mold after the pressure test.

5. When we operate in multiple people, the hydraulic press should be started by a special person and coordinated with each other.

6. Do not place hand or head between mold and indenter.

Seven. After we finish the work, we need to press the products and tools of the oil press. Arrange the molds and put them in the designated place

The above is the safety operation specification of the hydraulic press, and I hope it can help you.