What are the shock absorption methods of frame hydraulic press?

The frame hydraulic press will have a sensational appearance in the operation, which will not only affect the processing power but also form a certain psychological impact on the operator, so we should adopt a series of shock absorption methods, then, probably how to shock the frame hydraulic press?

One: After the frame type hydraulic press is fixed, look at the anchor bolt specification. Tighten the screw flat, listen to the disposal, the degree of fixing, about the anchor screw.

Two: Pay attention to the calculation of anchor bolt components. Because of the creep appearance of rubber, when the cushion iron is used for the first time, the weight of the anchor bolt is calculated. The machine will be treated again in two weeks.

Three: Put the required pad iron under the hole of the machine tool foot, insert the screw into it, and grip the foot with the nut. Sampling specification for anchor bolts. Place the nut in touch with the machine.

Four: Check the degree of the machine tool: the fixing of the frame hydraulic press on the foundation probably uses the anchor screws to investigate how to do the machine tool in the installation. When installing, place the anchor screws provided by us according to the corresponding orientation and the specification of anchor bolts. Learn to anchor screws. And gradually lower the lifted machine tool, about the anchor bolt specification scale. Each degree of adjustment bolt on the machine tool is inserted into the anchor screw. Therefore, in the face of this link to carry out a comprehensive inspection of the screw.