Hydraulic press daily maintenance inspection part

Method steps:

Check up before work.

1. Check whether the oil level, oil pool and oil mark meet the established requirements. If the requirements are not met, fill the oil as soon as possible.

2, check whether the key is sensitive, there is no deadlock phenomenon.

3. Check whether the motor grounding wire is loose, fallen or damaged. If loose to tighten, if dropped or broken should inform the maintenance personnel to repair.

4. Check whether the safety protection parts are perfect and good.

5. Check whether each handle is sensitive.

6. Tighten loose nuts.

On-duty inspection

1. Run the hydraulic pump to check whether the function of the hydraulic pump is good, and whether the sealing parts and pipelines are blocked and leaked.

2, check whether the limit button function is good, the block positioning is normal.

3. It is necessary to always observe whether the temperature and sound of each operating component are normal.

Check up after work.

1. Test and clean all moving parts.

2. Each control handle button is placed in neutral.

3, inspection, cleaning, finishing workbench and working area.

Lubrication system.

1. Clean oil pump and filter.

2, cleaning, inspection, dredging oil circuit, complete good lubrication, and eliminate leakage.

Control the system.

1. Clean all connection parts and add lubricating oil on time to ensure sensitive operation.

2. Check and tighten the upper and lower cylinder head, motor base and hammer anchor screws to ensure reliable fastening.

3, the machine downtime maintenance is very good for the machine.