What are the pressure adjustment methods of hydraulic press?

When the working pressure of the hydraulic press is not enough or too high, the pressure of the hydraulic press needs to be adjusted. There are two main methods:

1. Manual adjustment method

Manual adjustment method needs to manually adjust the working pressure of the hydraulic press by operating the valve, the specific steps are as follows:

(1) Open the pressure gauge of the hydraulic press and observe the working pressure of the hydraulic press.

(2) Adjust the working pressure of the hydraulic press by manually adjusting the adjusting screw in the valve.

(3) Check the pressure gauge of the hydraulic press to determine whether it meets the required working pressure.

2. Automatic adjustment method

The automatic adjustment method is to realize the automatic adjustment of the working pressure of the hydraulic press through the pressure controller. The specific steps are as follows:

(1) Set the working parameters of the pressure controller, including the maximum working pressure and the minimum working pressure.

(2) Start the hydraulic press and observe the display of the pressure controller to see whether the expected working pressure is achieved.

(3) If necessary, the working pressure of the hydraulic press can be adjusted by the adjustment button of the pressure controller.

Four column stretch forming machine